IEX-402-VDSL2

Industrial managed VDSL2 Ethernet extender

Automatic CO/CPE negotiation reduces configuration time
Link Fault Pass-Through (LFPT) support and interoperable with Turbo Ring and Turbo Chain
LED indicators to simplify troubleshooting
Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview

Product out of stock

Free shipping from €300

Promocja cenowa na model HDR-15-5

Product intended for professional use only

Description
Technical Specification
Download
Recommended Products

IEX-402-VDSL2

Description

The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on VDSL2 standard. The device supports data rate supports up to 100 Mbps and a long transmission distance of up to 3 km.

The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications.

To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting.

Additional Features and Benefits

Moxa proprietary Turbo Speed connections up to 15.3 Mbps
Supports Link Fault Pass-Through (LFP) and Line-swap fast recovery
Supports SNMP v1/v2c/v3 for different levels of network management
Interoperable with Turbo Ring and Turbo Chain network redundancy
Support Modbus TCP protocol for device management and monitoring
Compatible with EtherNet/IP and PROFINET protocols for transparent transmission
IPv6 Ready

Technical Specification

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector)	1 Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection
Combo Port, RJ-11 (RJ45 connector) or Detachable 2-Contact Terminal Block	1
Standards	IEEE 802.1p for Class of Service IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3x for flow control ITU G.993.2

Ethernet Software Features

Management	SNMPv1/v2c/v3, Modbus TCP, Back Pressure Flow Control, DHCP Client, HTTP, LLDP, Syslog, Telnet, TFTP
MIB	MIB-II
Time Management	SNTP

Switch Properties

MAC Table Size	1 K
Packet Buffer Size	512 kbits

LED Interface

LED Indicators

PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (TP port)

Serial Interface

Console Port

RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)

DIP Switch Configuration

Ethernet Interface

CO/CPE, SNR/SPEED, STD/INP

Power Parameters

Power Connector	2 removable 2-contact terminal block(s)
Input Voltage	12/24/48 VDC, 9.6 to 60 VDC
Input Current	0.34 A @ 24 VDC
Overload Current Protection	Supported
Reverse Polarity Protection	Supported

Physical Characteristics

Housing	Metal
IP Rating	IP30
Dimensions	35 x 130 x 105 mm (1.38 x 5.12 x 4.13 in)
Weight	275 g (0.61 lb)
Installation	DIN-rail mounting, Rack mounting (with optional kit)

Environmental Limits

Altitude	2000 m Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)

Standards and Certifications

Safety	UL 508
Hazardous Locations	ATEX, Class I Division 2
EMC	EN 55032/24
EMI	CISPR 32, FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV IEC 61000-4-5 Surge: Power: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF
Traffic Control	NEMA TS2
Railway	EN 50121-4
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6