Accessories

• two independent DALI buses
• built-in magistrail power supply (up to 250mA per bus)
• possibility to connect 2x64 DALI actuators
• possibility to connect 2x12 DALI input devices
• up to 16 scenes per channel
• LCD display
• 4 built-in relays (250V / 5A)
• configuration via built-in USB port
• configurable via Ethernet output
• KNX gateway function (in DLC-02KN models)
• 5-year warranty

Discounted prices and exact stock levels are visible after logging in to the e-shop.

• Specific component from Japan
• Saving power, High sensitivity, Easy installation
• Compatible with any light source: Tungsten lamp, Light tube, LED light
• Multi-Function switchablel ; OFF delay, Standby brightness, Day/Night functions 3 main settings combination

• Specific component from Japan
• Saving power, High sensitivity, Easy installation
• Compatible with any light source: Tungsten lamp, Light tube, LED light
• Multi-Function switchablel ; OFF delay, Standby brightness, Day/Night functions 3 main settings combination

• Specific component from Japan
• Saving power, High sensitivity, Easy installation
• Compatible with any light source: Tungsten lamp, Light tube, LED light
• Multi-Function switchablel ; OFF delay, Standby brightness, Day/Night functions 3 main settings combination

• Universal AC input / Full range ( up to 305VAC)
• Convert DALI signal to PWM signal
• 4 DALI addressable output channels
• Built-in push dim function
• Comply with DALI standards (lEC62386-101, 102, 207)
• PWM active high or active low selectable by jumper
• Linear or logarithm dimming curve selectable (comply with IEC62386-207)
• Dimming range: 1~ 100%
• Built-in relay for ON/OFF control of LED power supply
• Fully isolated plastic case
• Class II power unit, no FG
• IP20 design
• Power consumption < 0.5W (Note.1)

• 23A inrush limiting current, 16A continuous
• 180~264VAC AC input
• Integrated bypass relay, no simple NTC
• Internal thermal protection
• Installed on DIN Rail TS-35/7.5 or 15 (lCL-16R)
• -30~+70°C wide working temperature

• 48A inrush limiting current, 28A continuous
• 180~264VAC AC input
• Integrated bypass relay, no simple NTC
• Internal thermal protection
• Installed on DIN Rail TS-35/7.5 or 15 (lCL-28R)
• -30~+70°C wide working temperature
• Over voltage category III
• Operating altitude up to 5000 meters(Note. 2)

• Compact size with 2SU(35mm) width(type R)
• Universal AC input/ Full range
• Withstand 300VAC Surge input for 5 seconds
• Isolation class II
• No load power consumption<0.5W(type L)
• Protections: Short circuit / Over voltage
• Cooling by free air convection
• 3 color LED for status indicator(type R)
• Installed on DIN rail TS-35/7.5 or 15(type R)
• 100% full load burn-in test

• overvoltage protection up to 10kV
• housing in accordance with IP67
• working temperature from -40 to +70 degrees
• LED operation signaling

Discounted prices and exact stock levels are visible after logging in to the e-shop.

• thermal protection
• double insulated wire
• LED indicating device status
• surge protection up to 20kV
• suitable for overvoltage protection of a LED driver with class I insulation
• conforms to UL1449
• IP66
• instantaneous current resistance up to 20kA

Discounted prices and exact stock levels are visible after logging in to the e-shop.

• Type 2 component assemblies
• Line to Ground&Line to Line protected
• Parallel (3 wires) connection style
• LED status indicator
• Suitable for LED driver surge protection
• IP67 design for indoor or outdoor installations
• 10KV surge protection capability

• For MEAN WELL LED driver
• with Smart Timer Dimming function
• Simple connection and configuration
• Push terminal and mini-USB port
• No need of battery or AC power
• LED status indicator