Industrial protocol gateways

• 1 x 10/100 Mbps Ethernet port
• Integrates Modbus TCP and Modbus RTU/ASCII networks
• Baud rate: supports up to 230.4 Kbps
• Supports up to 16 connections per serial port under Modbus master mode and 32 sessions under Modbus slave mode
• Built-in 8-kV ESD protection for all serial signals
• Software-selectable RS-232/422/485-2w/485-4w communication
• Supports 32/64-bit Windows 2000/XP/Vista/7/8/8.1/10, Windows Server 2003/2008/2012, and Linux
  
  

• Protocol conversion from proprietary serial or Modbus to EtherCAT
• Supports EtherCAT slave
• Supports Modbus RTU/ASCII client
• Maximum data input and output of 512 bytes
• Serial port with 2 kV isolation protection
• Supports MicroPython programming for proprietary serial
• Built-in Ethernet cascading for easy wiring
• Supports redundant dual DC power inputs and 1 relay output
• Security features based on IEC 62443-4-2

•  Supports Auto Device Routing for easy configuration
•  Supports route by TCP port or IP address for flexible deployment
•  Converts between Modbus TCP and Modbus RTU/ASCII protocols
•  1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports
•  16 simultaneous TCP masters with up to 32 simultaneous requests per master
•  Easy hardware setup and configuration

• Supports Auto Device Routing for easy configuration
• Supports route by TCP port or IP address for flexible deployment
• Connects up to 32 Modbus TCP servers
• Connects up to 31 or 62 Modbus RTU/ASCII slaves
• Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master)
• Supports Modbus serial master to Modbus serial slave communications
• Built-in Ethernet cascading for easy wiring
• 10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC/ST connector)
• Emergency request tunnels ensure QoS control
• Embedded Modbus traffic monitoring for easy troubleshooting
• Serial port with 2 kV isolation protection (for “-I” models)
• -40 to 75°C wide operating temperature models available
• Supports redundant dual DC power inputs and 1 relay output

• Supports Modbus/ASCII, RTU Protocol to control devices
• Allows up to 8 clients to access field data simultaneously
• Up to 31 Independent serial ports if configured to RS-485 serial mode
• Surge protection for RS-485 and power line
• Provides auto-searching device ID Windows utility
• Automatic RS-485 data flow control
• Easy mounting on DIN-rail or panel
• Supports popular HMI software with Modbus/TCP driver or OPC server
• Supports 10/100 Mbps communication speeds

• Supports Auto Device Routing for easy configuration
• Supports route by TCP port or IP address for flexible deployment
• Innovative Command Learning for improving system performance
• Supports agent mode for high performance through active and parallel polling of serial devices
• Supports Modbus serial master to Modbus serial slave communications
• 2 Ethernet ports with the same IP or dual IP addresses for network redundancy
• microSD card for configuration backup/duplication and event logs
• Accessed by up to 256 Modbus TCP clients
• Connects up to Modbus 128 TCP servers
• RJ45 serial interface (for “-J” models)
• Serial port with 2 kV isolation protection (for “-I” models)
• Dual VDC or VAC power inputs with wide power input range
• Embedded traffic monitoring/diagnostic information for easy troubleshooting
• Status monitoring and fault protection for easy maintenance

ABC4017 Anybus Communicator - PROFINET IO-Device - Modbus TCP server