Logic Analyzers

• 2-channel mixed-signal oscilloscope - analog inputs (sample rate 1GS/s on one channel, 500MS/s per channel in dual channel operation mode)
• 32-channel mixed-signal oscilloscope - digital inputs (sample rate of 1GS/s)
• 1-channel waveform generator (125 MS/s)
• 2-channel data logger
• Programmable power supply (0 to +6 V/ 0 to 1 A, 0 to +25 V/ 0 to 500 mA (isolated),0 to -25 V/ 0 to 500 mA (isolated))
• Digital multimeter (5 S/s)
• 8-channel digital inputs/outputs
• Logic analyzer (digital inputs shared with oscilloscope)
• Spectrum analyzer (inputs shared with oscilloscope)
• Network analyzer (inputs/outputs shared with oscilloscope and waveform generator)

• 2-channel oscilloscope (100 MS/s sample rate)
• 2-channel waveform generator (100 MS/s sampling rate)
• 2-channel programmable power supply (maximum power of 2.1 W for each power supply)
• 2-channel voltmeter (± 25 V DC, ± 25 V AC)
• 16-channel logic state analyzer(3.3 V /1.8 V CMOS, 100 MS/s)
• 16-channel pattern generator
• 2-channel spectrum analyzer (0Hz - 50 MHz)
• 16-channel protocol analyzer (UART, SPI, I²C, CAN)
• 2-channel bidirectional external triggers

• 4-channel oscilloscope with sample rate up to 0.5 GS/s
• 2-channel waveform generator (with a maximum sampling rate of 125 MS/s)
• 1-channel programmable power supply 1.2...3.3 V /300 mA
• 4-channel voltmeter (±25 V DC, ±25 V AC)
• 4-channel data logger
• 16-channel logic analyzer (1.2...3.3 V CMOS)
• 16-channel protocol analyzer (UART, SPI, I²C, CAN)
• 2-channel bidirectional external trigger

• 32-channel digital logic state analyzer (1.2...3.3 V CMOS, 8 channels at 800 MS/s*, 16 channels at 400 MS/s* and 32 channels at 200 MS/s)
• Protocol analyzer (SPI, I²C, UART, CAN, AVR)
• 16-channel pattern generator (1.2...3.3 V CMOS, 100 MS/s)
• 4-channel programmable power supply 1.2...3.3 V /100 mA. The same voltage supplies the input buffers of the logic state analyzer and the input/output buffers of the pattern generator to maintain logic level compatibility with the circuit under test.

• Two-channel USB digital oscilloscope (1 MΩ, ±25 V, differential, 14-bit, 100 MS/s, 30 MHz+*)
• 16-channel digital logic analyzer (3.3 V CMOS and 1.8 V or 5 V tolerant, 100 MS/s)
• 2 programmable power supplies (0.5 V to 5 V , -0.5 V to -5 V). The maximum available output current and power depend on the Analog Discovery 2 powering choice.

*Note: To achieve maximum bandwidth, use of the BNC Adapter for Analog Discovery is required.