DIN rail power supply

• battery power module in UPS systems
• connection parallel to the DC bus
• designed for 24V systems
• load current up to 20A
• built-in battery test function
• protection against reverse battery connection
• relay connectors and LEDs informing about the functioning of the DC power bus, failure and battery discharge
• open air cooling
• width 40mm
• working temperature -30 ~ + 70 ° C
• compliance with a number of standards and certificates
• 3-year warranty

• battery power module in UPS systems
• connection parallel to the DC bus
• designed for 24V systems
• load current up to 40A
• built-in battery test function
• protection against reverse battery connection
• Relay connectors and LEDs informing about the functioning of the DC power bus, failure and battery discharge
• open air cooling
• working temperature -30 ~ + 70 ° C
• compliance with a number of standards and certificates
• 3-year warranty

• input voltage 90-264VAC, 124-370VDC
• active PFC function
• protections: short circuit, overvoltage and overload protection
• protection against discharge and reverse connection of the battery
• adjustable output voltage 13.8V: 12 ~ 15V; 27.6V: 24 ~ 30
• AC OK relay output and low battery charge
• cooling with open air circulation
• working temperature from -30 ~ + 70 ° C
• LED operation signaling
• compliance with many standards and certificates
• 3-year warranty

Discounted prices and exact stock levels are visible after logging in to the e-shop.

• Ultra slim design with 17.5mm (1SU) width
• Universal input 85~264VAC (277VAC operational)
• No load power consumption<0.3W
• lsolation class Ⅱ
• Pass LPS (Limited power source)
• DC output voltage adjustable
• Protections : Short circuit / Overload / Over voltage
• Cooling by free air convection (working temperature:-30~+70°C)
• DIN rail TS-35/7.5 or 15 mountable
• Over voltage category Ⅲ
• LED indicator for power on

• Universal AC input/Full range
• Protections: Short circuit / Overload / Over voltage
• Cooling by free air convection
• Can be installed on DIN rail TS-35/7.5 or 15
• Built in DC OK active signal
• LED indicator for power on
• No load consumption<0.75W
• 100% full load burn-in test

• Ultra slim design with 35mm(2SU) width
• Universal input 85~264VAC(277VAC operational)
• No load power consumption<0.3W
• lsolation class Ⅱ
• Pass LPS (Limited power source)
• DC output voltage adjustable
• Protections : Short circuit / Overload / Over voltage
• Cooling by free air convection (working temperature:-30~+70C)
• DIN rail TS-35/7.5 or 15 mountable
• Over voltage category Ⅲ
• LED indicator for power on

• Universal AC input/Full range
• Protections: Short circuit/Overload/Over voltage
• Cooling by free air convection
• Can be installed on DIN rail Ts-35/7.5 or 15
• Built in DC OK active signal
• LED indicator for power on
• No load consumption<0.75W
• 100% full load burn-in test

• Ultra slim design with 5mm (3SU) width
• Universal input 85~264VAC (277VAC operational)
• No load power consumption<0.3W
• Isolation class Ⅱ
• Pass LPS (Limited power source)
• DC output voltage adjustable
• Protections : Short circuit / Overload / Over voltage
• Cooling by free air convection (working temperature:-30~+70°C)
• DIN rail TS-35/7.5 or 15 mountable
• Over voltage category Ⅲ
• LED indicator for power on

• Universal AC input/Full range
• Protections: Short circuit / Overload / Over voltage
• Cooling by free air convection
• Can be installed on DIN rail TS-35/7.5 or 15
• Class l, Div 2 Hazardous Locations T4
• LED indicator for power on
• DC OK relay contact
• No load power consumption<0.75W
• 100% full load burn-in test

• Universal AC input/Full range
• Protections: Short circuit / Overload / Over voltage
• Cooling by free air convection
• Can be installed on DIN rail TS-35/7.5 or 15
• Class l, Div 2 Hazardous Locations T4
• LED indicator for power on
• DC OK relay contact
• No load power consumption<0.75W
• 100% full load burn-in test

• Ultra slim design with 70mm (4SU) width
• Universal input 85~264VAC (277VAC operational)
• No load power consumption<0.3W
• Isolation class Ⅱ
• Pass LPS (Limited power source) for Blank type
• DC output voltage adjustable
• Protections : Short circuit / Overload / Over voltage
• Cooling by free air convection (working temperature:-30~+70°C)
• DIN rail TS-35/7.5 or 15 mountable
• Over voltage category Ⅲ
• LED indicator for power on

Discounted prices and exact stock levels are visible after logging in to the e-shop.

• Universal AC input / Full range
• Protections: Short circuit / Overload / Over voltage / Over temperature
• ZCS/ZVS technology to reduce power dissipation
• Cooling by free air convection
• Can be installed on DIN rail TS-35/7.5 or 15
• DC OK relay contact
• No load power consumption<1W
• LED indicator for power on
• 100% full load burn-in test